{"id":8254,"date":"2020-08-26T01:33:01","date_gmt":"2020-08-26T08:33:01","guid":{"rendered":"https:\/\/carupgrade.co\/?p=8254"},"modified":"2020-11-12T12:55:26","modified_gmt":"2020-11-12T20:55:26","slug":"blown-head-gasket","status":"publish","type":"post","link":"https:\/\/carupgrade.co\/blog\/blown-head-gasket\/","title":{"rendered":"Blown Head Gasket: Causes And Costs To Repair It"},"content":{"rendered":"\n

The car repair cost is an unavoidable burden on the car owner\u2019s pocket. When it comes to the cost of a full-blown cylinder head gasket, you should know that the average cost of repairing a blown head gasket is between $1,000 to $2,000, in some cases till $2,500. However, you should also have some information on how a burnt cylinder head gasket to understand the repairs your car may undergo.<\/p>\n\n\n\n

Head Gasket: What Is It? What Does It Do?<\/h2>\n\n\n\n

A head gasket might appear as an insignificant part of your engine. It consists of several layers of steel and elastomer, thick and thin, intertwined within holes. The head gasket sits between the engine block and the cylinder to create an airtight seal in the internal combustion engine. This allows the engine to carry out the combustion reaction safely inside the cylinder, sealing it like coolant and oil. The tight seal provides the compression needed to run the engine.<\/p>\n\n\n\n

Some gaskets present inside older and high-end cars are made of copper rather than multilayer steel. A copper seal is usually very strong, so if you have a blown seal, chances are less than its copper. Copper, being a soft metal and capable enough to fit snugly in compact places, forms an exceptional seal between the engine block and cylinder head. Compound cylinder head gaskets in older vehicles are made from materials such as asbestos and graphite, the least reliable material for seal.<\/p>\n\n\n\n

Fortunately, such material is not used anymore, so if you have a new car that won\u2019t be a problem.<\/p>\n\n\n\n

What Causes The Head Gasket To Fail?<\/h2>\n\n\n\n

The term \u201cblown\u201d describes what happens to a cylinder head gasket. Since the cylinder must maintain the compression, otherwise, the thermal pressure can damage the head seal, breaking it and causing an explosion. <\/p>\n\n\n\n

However, this is only one of several possible causes, so let\u2019s take a look at others.<\/p>\n\n\n\n

Improper Seal Installation<\/h3>\n\n\n\n

Improper seal installation is a potential cause of a blown seal. This may be due to the fact that the gasket is the wrong size and is not designed for your car or has been installed inaccurately.<\/p>\n\n\n\n

Seals Wearing Out<\/h3>\n\n\n\n

Some seals can easily wear out with time. This is more common with a composite seal, but it can also happen with multilayer steel.<\/p>\n\n\n\n

Hot Spots<\/h3>\n\n\n\n

Hot spots can be more difficult to predict as a cause for gaskets to burn. Some engines are designed for specific cylinder head gasket filling certain areas of the cylinder head. Replacing the factory seal may expose no longer protected hot spots, damaging the new seal faster.<\/p>\n\n\n\n

Abnormal Combustion<\/h3>\n\n\n\n

Abnormal combustion can also blow up the head gasket. If there is a problem with fuel injection or engine ignition, it can cause excessive tension inside the cylinder head gasket. This gasket will deteriorate over time, causing it to explode soon.<\/p>\n\n\n\n

High Temperatures<\/h3>\n\n\n\n

High temperatures can be the most common cause of blown head gaskets. On the high temperature, the coolant soon starts leaking, causing the engine to overheat, and the gasket cracks open due to heat expansion.<\/p>\n\n\n\n

There are many reasons for a blown head gasket. Finding out the right reason is the best way to solve the problem. The type of gasket will also be included in the repair costs.<\/p>\n\n\n\n

How Can You Figure Out A Blown Head Gasket?<\/h2>\n\n\n\n

No one wants to blow the head gasket as it will cost a lot to repair it, but how do you know if this happened in the first place? <\/p>\n\n\n\n

Signs of a Blown Head gasket<\/h3>\n\n\n\n

Here is a list of few things that could mean a blown head gasket:<\/p>\n\n\n\n